Table of Contents
Advertisement
Specifications
Audio Power Specifications _
POWER OUTPUT AND TOTAL HARMONIC DISTORTION 13 watts per channel minimum
continuous average power into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1%
total harmonic distortion,
Other Specifications
Power amplifier section
Outputs:
Speaker output with
bullet connectors
Speaker impedance:
4-8 ohms
Maximum power output:
20 W x 4 (at 4 ohms)
.
Measured at 14.4 V
Cassette section
Signal-to-noise ratio:
55 dB
Tape WOW and Flutter:
<< 0.15%
Tape frequency response:
30 - 18,000 Hz+3 dB
Tuner section
FM
Tuning range:
87.7 - 107.9 MHz
Antenna terminal:
External antenna connector
intermediate frequency:
10.7 MHz
Sensitivity:
13 dBf
Selectivity:
75 dB at 400kHz
Signal-to-noise ratio:
. 65 dB(stereo), 70 dB (mono)
Harmonic distortion at 1 kHz:
0.7%(stereo}, 0.3%(mona)
Separation:
35d0B
Frequency response:
30 - 15,000 Hzi3 dB
AM
Tuning range:
530 - 1,710 KHz
.
Antenna terminal:
External antenna connector
intermediate frequency:
© 450 kHz
Sensitivity:
13 av
Signal-to-noise ratio:
55 dB
Harmonic distortion at 1 kHz:
1.0%
General
;
Tone controls:
Bass + 10dB at 100 Hz
Treble + 10 dB at 10 kHz
Power requirements:
12 V DC car battery
:
(negative ground)
Operating temperature:
—10°C to 50°C
(15°F to 120°F)
Dimensions:
Approx. 178 x 50 x 150mm
(wih/d) (7 x 2 x 6 in.) not
incl. projecting paris and
controls
Mass:
Approx. 1.7kg (3 Ib. 12 02.)
Supplied accessories:
=
Mounting hardware (1 set)
Face plate case (1)
Design and specifications subject to change without
notice.
Optional accessories
CDC-M5 10 CD Changer
9-404-230-283
Multi-Changer Connection Box
9-404-230-290
iP
Advertisement
Table of Contents
