Table of Contents
Advertisement
Installing the BTS3900C Cabinet
d
Installing the BTS3900C Cabinet on a Stand
1. Mark off four fixing points
according to the holes on the stand.
3. Place the stand on the holes, and then use expansion bolt assemblies to
install the stand on the ground securely.
2. Use a percussion drill to drill holes at
the fixing points, and then install
expansion bolt assemblies.
Ф16
Use a cleaner to clear the dust inside and around
the holes. Then, measure the inter-hole spacing. If
the inter-hole spacing is too wide or too narrow,
locate and drill holes again.
M12x60
12
Advertisement
Table of Contents
