HP 8082A Operating And Service Manual page 2

The Hewlett-Packard Company certifies that this instrument was thoroughly
tested and inspected and found to meet its published specifications when
shipped from the factory. The Hewlett-Packard Company further certifies
that its calibration measurements are traceable to the US National Bureau of
Standards to theextentallowed by the Bureau'scalibration facilities or to the
calibration facilities of other International Standards Organization Members.
WARRANTY AND ASSISTANCE
workmanship. This warranty applies for one year from the date of delivery,
or, in the case of certain major components listed in the operating manual,
for the specified period. We will repair or replace products which prove to be
defective during the warranty period. No other warranty is expressed or
implied. We are not liable for consequential damages.
For any assistance contact your nearest Hewlett-Packard Sales and Service
Office. Addresses are provided at the back of this manual.
Qne copy of this manual is supplied with each instrument. Additional copies
may be purchased from the locai Hewlett-Packard Sales and Service Office.
Specify the instrument model number and serial number. A microfiche
version of this manual is availabie under part number 08082-90502
Reference should be made to the manual change sheeis supplied with the
manual for errata and technical changes, and Po Section 7 (Backdating/
Updating) ~
serial number which appears on the rear panel of the instrument; the serial
number prefix of the instrument to which this manual applies directly is:
CERTIFICATION
PREFACE