HP 8082A Operating And Service Manual page 52

Table 5-16. IContinued)
amplitude vernier CW
(attenuator not in ECL-mode).
amplitude vernier CCW
(attenuator not in ECL-mode).
attenuator in ECL-mode
Scale factors:
This adjustment IA5 R80, R81, R115)
must be made with the whole instrument
Ext dc-offset:
ext offset on, vernier CCW + CW
(can be measured at each of the 2 80821% pulse output jacks,
which must be terminated by 50 ohm).
in ECL position
ohm.