Kenwood TH-77A Instruction Manual page 32

CALL / Memory Channel Scan
Press the F key, then the CALL/C SCAN key in the
memory channel mode to start alternate scanning of
the call channel and the memory channel last used.
4-5-9. V/M/C (VFO/Memory/Call) Scan
In the call channel mode press the F key, and then the
CALL/ C SCAN key to scan the VFO frequency shown on
the display, the memory channel that was last used and
the call channel in turn.
4-5-10. | Memory Channel Lockout
This function allows you to specify which memory
channels you wish to skip during memory channel scan.
2. Press the F key. The F indicator lights. Within 10
seconds of pressing the F key, press the 0 / L.OUT key.
A % indicator appears to the below of the memory
channel number. This indicates that the memory
channel will be skipped in the memory channel scan
mode.
ow
/ L.OUT key. The ¥ indicator goes off.
4-5-11. Priority Alert Function
. Adjust the SQL control to the threshold point.
wr