Power Adaptor Connection; Basic Initialization; Network Settings - D-Link DPH-120SE User Manual

Step 3: connect the power supply plug to the AC5V adapter port on the back of
the phone. Use the power cable to connect the power supply to a standard power
outlet in your workspace.
Step 4:push the on/off switch on the back of the phone to the one side, then the
phone's LCD screen displays "Initializing wait logon". Later, a ready screen
typically displays the date, time.
If your LCD screen displays different information from the above, you need refer
to the next section "Initial setting" to set your network online mode.
If your VoIP phone registers into corporate IP telephony Server, your phone is
ready to use.

Power adaptor connection

Make sure that the power you use is comply with the parameters of power adaptor.
1. Plug power adaptor to power socket.
2. Plug power adaptor's DC output to the DC5V port of DPH-120S/DPH-120SE
to start up.
3. There will be displayed black line and "INITIALIZING" on the screen. After
finishing startup, phone will show greeting, current date and time and so forth.
4. If phone has registered to the server, you can place or answer calls.

2.2 Basic Initialization

DPH-120S/DPH-120SE is provided with a plenty of functions and parameters for
configuration. User needs some network and VoIP knowledge so that user could
understand the meanings of parameters. In order to make user use the phone more
easily and convenient, there are basic configurations introduced which is
mandatory to ensure phone calls.

Network settings

Make sure that network is connected already before setting network of phone.
DPH-120S/DPH-120SE uses DHCP to get WAN IP configurations, so phone
could access to network as long as there is DHCP server in it. If there is no DHCP
server available, phone has to be changed WAN network setting to Static IP or
PPPoE.
Setting PPPoE mode (for ADSL connection)
1. Get PPPoE account and password first.
2. Press Menu->Settings->Advanced Settings, then enter passwords, and choose
network ->WAN settings->Connection Mode, enter and choose PPPoE through
navigation keys and press the Save key.