Table of Contents
Advertisement
Enable Bridge
Mode
Notice:WhenLAN IP or bridge mode status is changed, the system will
reboot!
If you choose the bridge mode, the LAN configuration will be disabled.
QoS&VLAN
7.3.1.7
The VOIP phone support 802.1Q/P protocol and DiffServ configuration. VLAN
functionality can use different VLAN IDs bysetting signal/voice VLAN and data
VLAN. The VLAN application of this phone is very flexible.
chart 1, there is a layer 2 that switches without setting VLAN. Any broadcast
frame will be transmitted to the other ports except the send port. For example, a
the phone will no longer set IP address for LAN
physical port,LAN and WAN will join in the same
network. Click "Apply", the phone will reboot.
In
Advertisement
Table of Contents
