Table of Contents
Advertisement
Timeout
Enable Session Timer Set Enable/Disable Session Timer, whether support
Session Timeout
Subscribe for MWI
MWI Number
Subscribe Period(s)
Conference Type
Conference Number
Registration Expire(s) Set expire time of SIP server register, default is 60
Enable Service Code
DND On Code
DND Off Code
Always CFwd On
Code
the incoming call after Auto Answer Time.
RFC4028.It will refresh the SIP sessions.
Set the session timeout.
Enable the Subscribe for MWI by selecting it, the
phone will send subscribe message for MWI to the
SIP Server.
Specify the MWI Number;Please contact your
system administrator for the connecting code.
Different systems have different codes.
Overtime of resending subscribe packet.
Suggestusing the default configuration.
Specify the Conference Type, if you select the local,
you needn't input the conference number.
Specify the network conference number, please
contact your system administrator for the network
conference number.
seconds. If the register time of the server requested
is longer or shorter than theexpired time set, the
phone will change automatically the time into the
time recommended by the server, and register again.
If you want to realize the following function by the
server, please enter the On Code and Off
Codeoption,then when you choose to
enable/disablefollowing function on your IP phone,
it will send message to the server, and the server will
turn on/off the function immediately.
Set the DND On Code, When you press the DND
hot key, the phone will send a message to the server,
and the server will turn on the DND function. Then
any calls to the extension will be rejected by the
server automatically. And the incoming call record
will not be displayed in the Call History.
Set the DND Off Code, When you press the DND
hot key, the phone will send a message to the server,
and the server will turn off the DND function.
Set the Always CFwd On Code, when you choose to
enable the always forward function on your phone, it
will send message to the server, and the server will
turn on the function immediately. When there are
calls to the extension, the server will always forward
it to the set number automatically. And the IP phone
will not show the record in the call history anymore.
Advertisement
Table of Contents
