Philips 32PF1700T/96 Service Manual page 4

IMP1.0A LA 4
Connecting power
1. Connect one end of the power cord to
the AC-IN power socket on the display.
2. Connect the other end of the power
cord to the power outlet. The display will
enter standby mode and the power
indicator will light up red.
Only use an appropriate power cable for
your region. Never use a power cable
which appears damaged or frayed. Never
change the plug type on a power cable. Be
aware of total loading when using
extension cords or multiple outlet power
boards.
WARNING: This display has been
engineered and manufactured with the
highest priority on safety, however,
IMPROPER HANDLING OR USE CAN
RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARD. Please
handle this display with care. If damaged,
unplug the power cable from the display.
Transport the display to your nearest
authorized service centre for repair.
Adjust viewing angle
This display is equipped with an
adjustable swivel base. If necessary, turn
the display screen to an appropriate angle
(max. approximately 15 degrees left and
right) for more comfortable viewing.
Installing the tuner box
Important safety precautions
Before installing the tuner box, pay
attention to the following to ensure the
safety of installation:
• Wear suitable insulation gloves to
prevent any possibilities of injuries.
• Be sure to turn the display power off and
disconnect the power cord from the power
outlet. Turn the power of the devices off