Philips 32PF1700T/96 Service Manual page 5

and remove all connected signal cables if
the display is connected to other devices.
• Make sure that there is sufficient space
around the display for performing the
installation. If not, it is suggested that you
move the display to a suitable place to
perform installation, and then move it back
to its original location when installation is
completed.
Installing the tuner box
1. Locate the tuner box slot on the left side
ofthe display (as shown in the illustration).
2. Remove the protective film on the tuner
box and then insert it into the slot. Pay
attention to the direction of the tuner box
when inserting.
3. Push the tuner box all the way into the
slot.
4. Use the supplied screw and a suitable
scrsewdriver to secure the tuner box on
the display.
5. Connect the cable or aerial antenna
cable to the connector on the tuner box.
Follow the instructions of
storing channels" on page 22
store the channels available in your area.
IMP1.0A LA 5
"Searching and
to scan and