Mowing Without Automatic Charging; Starting Auto Mowing At The Desired Timing (Putting Scheduled Mowing On Hold); Mowing In A Spiral Pattern; Park Preferences - Makita RM350D Instruction Manual

Mowing without automatic charging

[Top menu] > [Start mowing] > [Mowing without charging]
The lawn of a sub area established separately from the main area is
mowed automatically. As there is no path for coming and going with
the main area, automatic charging is not possible in a sub area, yet
automatic operation can continue within the preset time or until the
remaining battery capacity runs out. This setting can also be used
in the main area to perform mowing work for only the selected time
when return to the charging station and charging is not needed.
About the sub area
This is a separate mowing work area that is enclosed by the boundary
wire but does not have a path wide enough for the Robotic Mower
to pass to the main area. Mowing is performed automatically while
detecting the wire signals, but automatic return to the charging station
is not possible.
► Fig.21: 1. Main area 2. Charging station 3. Boundary wire 4. Path
5. Sub area
NOTICE: In order to operate the Robotic Mower in a sub area,
move the Robotic Mower by hand from the main area to the
sub area in advance.
NOTICE: To charge the Robotic Mower working in a sub area,
temporarily stop the Robotic Mower and turn off the power,
and then carry it to the main area. After moving the Robotic
Mower, turn on the power again and manually connect it to the
installed charging station.
1. Press the button on the control panel.
The sub menu appears.
2. Select [Mowing without charging].
The option menu appears.
3. Select the desired option.
Option Details
Until battery Mows automatically until the remaining battery
empty capacity runs out.
For 30 min Mows automatically for 30 minutes.
For 90 min Mows automatically for 90 minutes.
Press the key, and the message [Close the display cover to start
mowing.] appears.
4. Close the display cover.
The Robotic Mower starts mowing.
NOTE: When [Until battery empty] is executed, the Robotic Mower
will stop at the point where the remaining battery capacity runs out.
To charge the Robotic Mower, manually connect it to the charging
station in the main area.
Starting auto mowing at the desired timing (Putting
scheduled mowing on hold)
[Top menu] > [Start mowing] > [Deactivate schedules]
You can put pre-scheduled mowing work on hold for a certain period
and have the Robotic Mower operate automatically at the necessary
or convenient timing. The Robotic Mower normally executes and
stops mowing according to a preset schedule, but selecting this menu
lets you operate the Robotic Mower automatically even outside the
scheduled times.
NOTE: Once the set period passes, the pre-registered schedule
becomes enabled again and the Robotic Mower restarts work
according to the preset schedule.
1. Press the button on the control panel.
The sub menu appears.
2. Select [Deactivate schedules].
The option menu appears.
3. Select the desired option.
Option Details
For 24 hours Puts the mowing work scheduled in the Robotic
Mower on hold for 24 hours.
For 3 days Puts the mowing work scheduled in the Robotic
Mower on hold for 3 days.
Press the key, and the message [Close the display cover to start
mowing.] appears.
4. Close the display cover.
The Robotic Mower starts mowing.
NOTE: To stop the mowing work within the set period, operate the
Robotic Mower manually such as by pressing the "STOP" button on
the Robotic Mower or by using the [Park] menu, etc.

Mowing in a spiral pattern

[Top menu] > [Start mowing] > [Mowing - With spiral cutting]
Mowing starts in a spiral pattern from a point of concern within the
area, such as a place where the grass is dense or where the grass
height is uneven due to unmowed grass, etc. After navigating in a
spiral pattern to mow the lawn intensively in a specifi c location, the
Robotic Mower transitions to normal navigation and continues mow-
ing the entire area.
Normal path and spiral path
The Robotic Mower normally calculates its path automatically and
navigates randomly in straight lines within the area to achieve an
even lawn fi nish. However, you can prioritize and intensively mow
a target area of concern to achieve a good fi nish by starting spiral
cutting from a specifi c location, such as a place where the grass is
dense, unmowed grass remains, or the grass grows faster than other
places.
► Fig.22: 1. Normal path 2. Spiral path
1. Turn off its power switch and place the Robotic Mower in the
location to start spiral cutting. Then turn on the power switch.
2. Press the button on the control panel.
The sub menu appears.
3. Select [Mowing - With spiral cutting].
The option menu appears.
4. Select the desired option.
Option Details
Auto mowing Executes spiral cutting in the main area, and when
complete, continues mowing by automatic opera-
tion and charging.
Mowing without Executes spiral cutting, and when complete, con-
charging tinues auto mowing within the specifi ed period and
without automatic charging.
Press the key, and the message [Close the display cover to start
mowing.] appears.
5. Close the display cover.
The Robotic Mower starts mowing.

Park Preferences

NOTE: It is recommended to set the active search period for the
guide signal to "0" (zero), if you do not install guide wires in your
work area. It helps the Robotic Mower return to the charging station
quickly. For details, refer to "Setting the active search period for the
guide signal" (Page 22).

Returning the Robotic Mower to the charging station

[Top menu] > [Park] > [Stay at charging station]
The mowing work is stopped and the Robotic Mower is returned to
the charging station.
1. Press the button on the control panel.
The sub menu appears.
► Fig.23
2. Select [Stay at charging station].
Press the key, and the message [Close the display cover to return
to the charging station.] appears.
3. Close the display cover.
The Robotic Mower returns to the charging station.
20 ENGLISH