Resetting The User Preferences; Browsing The Product Information; Managing The Led On/Off Time; Checking The Details Of Operation Errors - Makita RM350D Instruction Manual

Resetting the user preferences

[Top menu] > [Main menu] > [Others] > [Reset all settings]
This is used to reset all saved user preferences and return them to
the initial state.
NOTICE: Some information and settings entered when starting
up the Robotic Mower for the fi rst time, such as the date and
time and the PIN code, are not reset.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
3. Select [Reset all settings].
The PIN code entry screen appears.
4. Use the keypad and enter the PIN code.
5. Follow the message displayed on the screen and complete the
setting.
When the message [Completed.] appears, press the

Browsing the product information

[Top menu] > [Main menu] > [Others] > [Information]
This displays the latest product information, such as the cumulative
work time and the software version information.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
3. Select [Information].
NOTE: After browsing the information, you can return to an
upper menu screen by pressing the
Press the key to return to the [Others] sub menu screen, or
the button to return to the [Main menu] screen.
Managing the LED on/off time
[Top menu] > [Main menu] > [Others] > [LED]
This is used to control the on and off times of the LED lamp on the top
of the Robotic Mower. For details on the LED lamp, refer to "Lamp
lighting" (Page 17).
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
NOTE: If the menu is not displayed, use the
the screen.
3. Select [LED].
The on/off schedule setting screen appears.
4. Select the desired option.
Option Details
Always ON The LED is always on. When this option is
selected, a check mark is placed in the [Schedule
1:] checkbox and [00:00] - [24:00] is displayed.
Always OFF The LED is always off . When this option is
selected, the check marks are removed from both
the [Schedule 1:] and [Schedule 2:] checkboxes,
and [00:00] - [00:00] is displayed.
Schedule 1: The LED is on within the set time range.
Schedule 2: The LED is on within the set time range.
► Fig.60
key.
key or the button.
/ keys to scroll
27
Setting schedules
(1) Use the keypad and place a check mark in the checkbox of the
schedule option to be set.
(2) Use the / / /
fi eld to be set.
(3) Use the keypad and enter the time.
(4) Repeat steps 2 and 3 to enter all the hour and minute entry
fi elds.
NOTICE: To enable a schedule setting, be sure to place a check
mark in the checkbox.
NOTICE: The times entered to [Schedule 1:] and [Schedule 2:]
cannot overlap.
5. Select [Verify].
When the message [Saved successfully.] appears, press the

Checking the details of operation errors

[Top menu] > [Main menu] > [Others] > [Error message]
This displays the most recent error messages, including the details,
reported to the Robotic Mower.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
NOTE: If the menu is not displayed, use the
the screen.
3. Select [Error message].
The Robotic Mower searches for the error information and displays a
list of the reported error codes in order from the newest.
4. Select an error code to check the details.
► Fig.61
The error details screen appears.
5. Check the date and time that the error occurred and the error
message contents.
► Fig.62
NOTE: After browsing the information, you can return to an
upper menu screen by pressing the
Press the key to return to the [Others] sub menu screen, or
the button to return to the [Main menu] screen.
ENGLISH
keys to highlight the hour or minute entry
/ keys to scroll
key or the button.
key.