Sanyo R227 Instruction Manual page 11

Installation | .
AC CONNECTION
Unwind the AC cord and extend it to its full length. Insert the AC plug
into any convenient 100-240V 50/60Hz household outlet. Please note
that this unitis equipped with a polarized AC plug which has one blade SD
wider than the other. This is a safety feature to reduce the likelihood of \
electric shock. This polarized AC plug will only fit in a polarized AC AC Outlet
outlet. If you find that you cannot insert this plug into your outlet, you
may have an obsolete non polarized outlet. Please do not try to defeat
your outlet, you should contact a qualified licensed electrician to
replace your obsolete outlet.
IMPORTANT NOTES:
e In case of malfunction due to electrostatic discharge, just reset the product (reconnect of
power
source may be required)
to resume
normal operation.
Should any trouble
occur,
remove the power source and refer to qualified personnel.
e If there is a power failure or the AC cord is disconnected for a short period of time, the clock
time will not be kept. When the power is resumed or the AC cord is connected again, the clock
time will be reset from the internet connection.
If the internet connection
is down or not
available the clock can be set manually.
RJ-45 JACK (if not using a wireless router)
Insert the RJ-45 connector into the RJ-45 jack on the unit.
Broadband АЈ-45 Connector. Connectethemet Broadband modem
modem Router Ẹ {with integrated router)
OR
E a a PUE:
bond y SA |
Do not plug-in an ethernet cable if intending to use a wireless network, to avoid confusion to the
circuitry. If intending to use an ethernet connection, attach cable to both modem/wired router and
radio before powering up radio.
US-9