Sanyo R227 Instruction Manual page 14

Steps for connecting your radio to your wireless network
Step 1-Power up the radio
First, connect the AC power.
In use, the radio can be switched
on or off with the standby button,
the display on the front of the radio will light up and say:
SANYO
After a few seconds, this will change to show:
Initializing network
After a few seconds, this will change to show:
< Scan for networks >
Enter network
View Config
Step 2 Scan for a wireless network connection
When the display says<Scan for networks>, press the SELECT button.
The radio will now scan for all available wireless networks and will display:
Scanning
if it can't find one then the display will say:
No networks
Found
< My Home Network >
05-12