Operation - Panasonic EY6812 Service Manual

Model EY6812
TRIAL OPERATION ( After checking TROLBLESHOOTING GUIDE.)
■ HA^t€R/DRILL
Confirm the action when setting the H/D handle to HAhfCR mode.
Rotation with hammering when the drill bit touches something like stone, and power.
It is OK if it takes about 7^10 seconds by 20kgf to hole (^12.5x40) on the concrete
(pressure strength 240kgf/cnl).
Confirm the action when setting the HA) handle to DRILL mode.
No hammering when the drill bit touches iron plate.
■ SPEED CONTROL
Change the rotation speed in proportion to the amount of pushing level on switch lever.
0 ~900 rpm
■ REVERSING LEVER
Confirm the action with setting the reversing lever to FORWARD or REVERSE.
- 9 -