Table of Contents
Advertisement
Troubleshooting Tips
Your Water Dispenser
1. Trouble: Will not dispense hot water
-lt
may
be caused by
dry
bum.
Unplug the power
cord and wait for
more
than 1 hour. Then
plug in, and fill
the tank
with
the
water,
the hot tank
may
work
again.
2. Trouble: Water cooler does not operate
·Not plugged in
·The
circuit breaker tripped or blown fuse.
3. Trouble: Water cooler is not cold enough. The water cooler does not
have the correct clearance
·Check to be sure
the
cold switch on the back
is on.
-The water cooler
does
not have
the
correct
clearance.
4. Trouble: The water cooler seems to make to much noise
-The
Rating
noise
may come from flow of the refrigerant,which is
normal.
·As
each
cycles
ends,
you may hear gurgling Sound
cause
by the
flow
of
refrigerant
in your
water cooler.
·Contraction and expansion of
inside walls
may cause popping and cracking noises.
·The water cooler is not level.
5. Trouble: Compressor turns on and off frequently
•The
room temperature is hotter than normal.
·The
water cooler
does
not have the correct clearance
Canada
C.I. Service Dept.
7045 Beckett Drive, Unit 15
Mississauga,
ON, L5S, 2A3
For service assistance
and product
information,
please go to
https:/Iwww.curtisint.com/product-support/
or email support@curtisint.com
Advertisement
Table of Contents
