Advertisement
NAME AND FUNCTION OF EACH PART
(INSIDE OF THE MAIN UNIT DOOR)
Amplifier section
2k Cords are connected to 18, 18 and 2 at shipping.
'CD PLAYER POWER SUPPLY
Connect the power cord of the CD changer.
Power supplied through these outlets is turned ON/OFF by
the equipment's POWER switch.
CAUTION:
Do not connect any cords other than the built-in CO changer pow-
er cord.
i ILLUMINATION terminal
{ LAMP terminal
20 SPEAKERS terminal
Both HIGH POWER and LOW POWER are available. HIGH
POWER is connected to the jukebox speakers and LOW
POWER is connected to the external speakers on the rear
side before shipment. These connections are interchange-
able.
@ LEVEL CONTROL knob
LINE SN:
Adjusts the level of the signals input from the LINE IN ter-
minal on the rear panel. To increase the input level, turn
the knob to the MAX side. To decrease the input level,
turn the knob to the MIN side.
STEREO/MONO
switch:
Set this switch to the STEREO side when the input source
is stereo. Set this switch to the MONO side when the in-
put source is monophonic.
If the input is made from a
monophonic source and the switch is set to the STEREO
side, either individual speaker wil! output sound.
MIC:
Adjusts the tevel of the signals input from the MIC IN termi-
nal on the rear panel. To increase the input level, turn the
knob to the MAX side. To decrease the input level, turn
the knob to the MIN side.
10
2% AUDIO IN jacks
Connect to the AUDIO OUT jacks of the CD changer with
the audio cord,
@ PLAYER 1, 2 and 3 GND terminals
@ HIGH POWER section
Adjusts the sound volume of the speakers connected to
the HIGH POWER of the SPEAKERS terminal.
VOLUME control:
Adjusts the sound volume. Turning the control to the
MAX side will increase the sound volume, whilst turning
the control to the MIN side will decrease the sound
volume. The right and left speakers can be separately ad-
justed. The inner control adjusts the right speaker, and the
outer control adjusts the left speaker. To adjust the sound
volume, turn either the inner or outer control while holding
the other control.
STEREO/MONO switch:
Set this switch to the STEREO side when the input source
is stereo. Set this switch to the MONO side when the in-
put source is monophonic. When using multiple external
speakers, setting the switch to the MONO side may result
in a better output, even though the input source is stereo.
@ TONE CONTROL knob
BASS
TREBLE
@® LOW POWER section
Adjusts the sound volume of the speakers connected to
the LOW POWER of the SPEAKERS terminal.
VOLUME control:
Adjusts the sound volume. Turning the control to the
MAX side will increase the sound volume, whilst turning
the control to the MIN side will decrease
the sound
volume. The sight and left speakers can be separately ad-
justed. The inner control adjusts the right speaker, and the
outer control adjusts the left speaker. To adjust the sound
volume, turn either the inner or outer control while holding
'the other one.
STEREO/MONO switch:
Set this switch to the STEREO side when the input source
is stereo. Set this switch to the MONO side when the in-
put source is monophonic. When using multiple external
speakers, setting the switch to the MONO side may result
in a better output, even though the input source is stereo.
«+ Adjusts the bass level,
c++
Adjusts the treble level.
Advertisement
