Advertisement
ATTACHING THE BILL ACCEPTOR
@®Attach the bill acceptor to the CD jukebox with the
screws.
Connect the connection cords.
i) Attach the bill acceptor to the bili holder.
ii) Fasten the bill holder with the screw @.
jit) Close the menu door,
jv} Adjust
the bill acceptor
horizontally
and vertically
(Press the bill acceptor against the panet side so that
there is no gap, and the bill intet is located at the cen-
ter.}; then fasten the iower part with the two screws
and the two washers ®,
v)} Tighten the screws ©, @ on both sides.
Connect the two
other cords in the
same way.
CAUTION:
Be careful not
to connect the
cords
of the
main unit side,
* Use an NB-2JA-400,
NB-2BA-400
and NB-2BA-600
made by CONLUX USA for the bill acceptor.
@®Reinstall the coin box.
insert it into the slot with the labeled side facing out.
Label
73
Advertisement
