Advertisement
HOW TO RETRIVE DATA
(2) Credit rates
Format: 2Sxxxxx
* XXxxxCR
The amount is indicated in three digits. The number of
credits to the amount is indicated in two digits for five pat-
terns, thus 25 digits in total. The first digit of the amount
represents dollar(s) and the latter two digits represents
cents, Data should be specified either in dollar{s) or cents.
For example, a setting of 1 doflar and 25 cents for 3
credits cannot be made. Input "00000" if you do not seta
value.
Example:
281000320007500180000000000 CR
:CR
In the above example, three patterns are set: $1 for 3
credits, $2 for 7 credits, and $5 for 18 credits.
Completion of the setting will be informed by transmitting
the (3Ah} code. If the setting is not valid, an error code
will be displayed.
(3) Number of times of cancellation by track skips
Format: 3SxxxxCR
Set the number of times of cancellation by track skips that
will cause cancellation. The setting value can range from
O through 99, If the number of times of cancellation by
track skips are set to "0", cancellation is not performed us-
ing the skip count.
Input the value in four digits,
Example:
3SO505CR
:cR
This example indicates that the number of times of cancel-
lation by track skips was set to five. Transmission of the :{3Ah)
code signifies that the setting is complete. An error code
is returned if the setting cannot be effected. See the
description for Submode
5, function mode
6 of the
Manual Service Mode.
{4) Auto-play interval time
Format: 4SxxCR
Set the auto-play interval time to be used during auto-
play. The
setting value can
range from
O through
99
minutes, If the auto-play interval time is set to "0", auto-
play will continue indefinitely without any time interval.
Example:
4810CR
:CR
This exampie
indicates that the auto-play interval time
was set to 10 minutes. Transmission of the :{3Ah) code
signifies that the setting is complete. An error code is
returned if the setting cannot be effected. See the descrip-
tion for Submode 5, function made 5 of the Service Mode.
56
(5) Password
Format: 5SxxxxCR
Set the password with a 4-digit number (*xxxx") using the
format shown above. The password can range from 0000
through 9999.
Example:
5S0123CR
:CR
This example
indicates that the password
was
set to
0123. Transmission of the :{3Ah) code signifies that the
setting is complete. An error code is raturned if the setting
cannot be effected. See the description for Submode 6,
function mode 1 of the Service Mode.
(6) ID No.
Format: 6SxxxxxxxxxxxCR
Set the ID No. to an 11-digit number. The ID No, can range
from 00000000000 through 99999999999,
Example:
6S00001234126CR
:CR
This example indicates that the ID No. was
set to
00001234126. Transmission of the :(3Ah) code signifies
that the setting is complete. An error code is returned if
the setting cannot be effected. See the description for
Submode 6, function mode 4 of the Service Mode.
{7} Priority songs
XxxxCR
Format: 7Sxxxxxxxx ++"
A maximum of twenty-five songs can be designated as
priority songs by inputting their 4-digit song numbers in
the format shown above. The 4-digit song numbers can
range from 1100 through 9699. "00" cannot be input for
the track number digits.
Example:
7$110112034510CR
:CR
This example indicates that song numbers
1101, 1203,
and 4510 are set as priority songs.
An error code is returned if the setting cannot be effected,
See the description for Submode 4, function mode 2 of
the Service Mode.
Advertisement
