Pairing The Device And Remote Control - Yamaha CS-800 User Manual

Pairing the device and remote control

In order to operate the device with the remote control, follow the procedure below to pair them.
1.
Long-press the [FUNCTION] button (on the rear panel of the device) for at least 2 seconds.
Device (rear panel)
The status indicator on the front panel of the device flashes in blue.
2.
Long-press the menu button on the remote control for at least 2 seconds.
Pairing is finished after the status indicator on the front panel of the device lights up in blue for 3 seconds.
NOTE
Long-pressing the [FUNCTION] button on the rear panel of the device will unpair the paired remote control.
To pair the remote control again, follow the pairing procedure above.
Related links
• Remote control (Page 9)
• Specifying the necessary settings for using a computer you brought in or a smart device (Page 16)
• Configuring the device from a TV screen (on-screen display menu) (Page 25)
CS-800 User Guide
15
Setup and connections