3.
The SSID name and encryption method of the selected access point appear.
The items and screens that appear differ depending on the encryption method of the selected access point.
If [+ Add network] was selected in
2
SSID name and encryption method
Item
SSID
Security
3
When [Security] is set to [WPA/WPA2/WPA3-Enterprise] or [WPA3-Enterprise 192-bit]
Item
EAP method
Phase 2 authentication
CA certificate
Domain
1
, specify all settings manually.
Displays the SSID name. (Maximum number of characters: 32)
The items that appear differ depending on the encryption method.
1) With the following, there is no need to specify other settings. Continue with
4
step
.
• [None]
• [Enhanced Open]
2) With the following, only [Password] appears in
Then, continue with step
• [WEP]
• [WPA/WPA2-Personal]
• [WPA3-Personal]
3) With the following, various items appear in
• [WPA/WPA2/WPA3-Enterprise]
• [WPA3-Enterprise 192-bit]
With this, [EAP Method] is [TLS]. ([EAP Method] is set to [TLS] and grayed
out.)
The items that appear differ depending on the selected encryption method.
• [PEAP]
Phase 2 authentication, CA certificate, Identity, Anonymous identity,
Password
• [TLS]
CA certificate, User certificate, Identity
• [TTLS]
Phase 2 authentication, CA certificate, Identity, Anonymous identity,
Password
• [PWD]
Identity, Password
This can be specified only when [EAP method] is set to [PEAP/TTLS]. [None/
PAP/MSCHAP/MSCHAPV2/GTC]
Allows you to select a CA certificate.
A credential that includes a CA certificate is added to those displayed in the
[Installed credentials] screen (displayed from the [Network] screen).
Allows you to type in the domain name authenticated by the CA certificate.
This can be specified only when [CA certificate] is set to [Use system
certificates].
CS-800 User Guide
46
Using Yamaha CS Manager to specify detailed settings
Description
4
.
3
.
Description
3
. Type in the password.