Yamaha CS-800 User Manual page 44

2
IP Settings (IPv4)
Item
Enable DHCP
3
4
Network Status
Item
Network status
Connect to Network
5
6
Saved Networks
7
Install Certificate
Installed Credentials
8
This can be specified only when the [Enable Wi-Fi] check box has been
selected.
Allows you to select whether to activate/deactivate DHCP.
To assign a static IP address, clear the [Enable DHCP] check box, and then
specify the static IP address with the following. (Enter using the
"XXX.XXX.XXX.XXX" format.)
• IP address
• Subnet mask
• Default gateway
• Primary DNS
• Secondary DNS
Item
Submit
Displays the network (Wi-Fi) connection status.
• disabled
Wi-Fi is deactivated.
• not connected
There is no Wi-Fi connection.
• connected to <SSID>
Displays the SSID name of the Wi-Fi network that the device is currently
connected to.
Item
Using Yamaha CS Manager to specify detailed settings
Click to apply the settings specified under "General Settings" and "IP
Settings" .
Click to connect to the network. For detailed instructions, refer to
"Connecting to a network" (page 45).
Click to display a list of known networks.
Click to install a client certificate file.
Click to view or delete from the list of installed credentials (CA/user
certificates).
CS-800 User Guide
44
Description
Description
Description
Description