Advertisement
Operation instructions
DISPLAY keys
(LEFT, RIGHT}
EQ.RANGE
select switch
EQ.REC switch
S -
ALEVEL controls
(Spectrum analyzer}
(LEFT, RIGHT}
PEAK HOLD key
@ User-preset of user-created
pattern
1 Create a desired equalizer pattern.
Follow steps 2 to 4 of "How to apply equalizer effect"
on page 8.
@ Any equalizer pattern can be preset if it is being displayed.
2 Preset the equalizer pattern in the manual
memory.
(1) Press the MEMORY key.
Blinks
MEMORY
(MEMORY
15K TOTAL"
Lights up.
(2) Press one of the MANUAL MEMO. keys.
fr 4 Fr tt ft ft MANUAL
MEMO.
. :
Ke
oISK TOTAL"
Press while | MEMORY | is lighted up.
Goes off
® Pattern is preset under the number of the MANUAL
MEMO.
key pressed.
@ Up to five patterns can be preset in the same manner.
@ When a pattern has previously been preset under the
MANUAL MEMO. key pressed, the newly preset pattern
replaces the previous pattern.
To return to the initial pattern (factory-preset
patterns M1 to M5 on page 9) by clearing the
user-preset pattern:
Press the MANUAL
MEMO.
key where the pattern to
be cleared is preset for more than 5 seconds.
10. GE-4030 (En)
MANUAL MEMO. keys
(M1~M5}
Input selector switch
{(LINE/TAPE)
REVERSE key
MEMORY key
@ How to play tape with equalizer
effect
Preparation:
Before proceeding to the following, connect a tape deck
as shown on page 6.
1 Set the input mode to the TAPE mode.
EI]
Light
:
LINE/TAP
ee
| 2 Create a desired equalizer pattern.
Follow steps 2 to 4 of "How to apply equalizer effect"
on page 8.
3 Start playing the tape deck.
m@ How to record sound with
equalizer effect
Preparation:
Before proceeding to the following, connect a tape deck
as shown on page 6.
1 Set the input mode to the LINE mode.
EQ.REC
INPUT
om |
am |
Should be off.
LINE/TAP
Te
2 Create a desired equalizer pattern.
Follow steps 3 and 4 of "How to apply equalizer
effect" on page 8.
| 3 Press the EQ.REC switch.
EQ.REC
— INPUT
a
TAPE
Lights up.
| 4 Start recording on the tape deck.
|
neration
Inetrurtinne
Advertisement
