Advertisement
System connections
manuals of the related components.
Do not plug in the power lead until all connections are completed.
Amplifier with the ADAPTOR jacks
Amplifier or receiver with the
TAPE MONITOR
switch
eee
cj]
°o om
P
;
TAPE
Unplug the shorting pins
to these jacks.
Our toma |
E£QUALIZER
(ADAPTOR)
Audio cord
f
»
Nip
IN<-- LINE
Tape deck
Ag
c
©)
©
System control connection
When
connected to an amplifier or receiver having KENWOOD
SYSTEM
CONTROL
terminals, system operation such as remote
control is made possible. For details, refer to the instruction manual of
the amplifier or receiver.
lf your amplifier or receiver is not equipped with the SYSTEM CON-
TROL terminals, do not connect anything to any SYSTEM CONTROL
terminal.
De not connect the unit in any system configuration other than
specified.
O
@ Be sure to insert the system control cord plugs fully into the
SYSTEM CONTROL terminals.
@ If the system control cord and audio cords are not connected
properly, the automatic system governing remote control and
system functions will not operate.
6 GE-4030 (En)
ook}. O
@ Qe)
t
Connect ta the TAPE jacks
(TAPE MONITOR).
(Set the TAPE MONITOR switch
to the monitoring position.)
oO
SYSTEM
CONTROL
=)
i
System control cord
GE-4030 rear panel
ea
To AC
outlet
AC voltage selector switch
(Except for some areas)
Shape of
the AC
outlet
AC voltage
selector switch
Unit destination
Not equipped
110 = 120 V/
220
— 240 V
U.S.A. and Canada
U.S. Military
U.K.
Not equipped
Other countries
Not equipped
410 -— 120 V/
220
~ 240 V
Not equipped
Notes:
1. Connect all cords firmly. If connections are loose there could be loss
of sound or noise produced.
. When
plugging and unplugging connection cords, be sure to first
remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause
malfunctions or damage to the unit.
. Do not connect up a power source which is larger than that indicated
_on the socket at the rear of the unit.
No
ee)
Advertisement
