Sony RDR-HX900 Operating Instructions Manual page 22

22
Controlling TVs with the remote
Yon can adjust the remote control's signal to
control your TV.
If you connected the recorder to an AV amplifier
(receiver), you can also use the supplied remote to
control the AV amplifier's (receiver's) volume
(page 23).
• Depending on the connected unit, you may not be able
to control your TV or AV amplifier (receiver) with
some or all of the buttons below.
• If you enter a new code munbe!, the code munber
previously entered will be erased.
• When you replace the batteries of the remote, the code
number may be reset to the defimlt setting. Set the
appropriate code munbe! again.
TV/DVD
;_'@'@i_ _ CH +/-
NumberSE T /0 @ @_
buttons, _® @ @_ VOL +/-
1
Slide the TV/DVDswitch to TV.
2 Bold down I/¢.
3 Enter your lV's manufacturer code (see
"Code numbers of controllable lVs"
below) using the number buttons.
4 Release I/¢.
When the TV'DVD switch is set to TV, the
remote performs the following:
I/(_) Turns your TV on or off
VOL +/ Adjusts the vohune of your
TV
CH w Selects the channel on your
TV
TViVIDEO Switches your TV's input
source
Nmnber buttons and Selects the channel on your
SET TV
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
Manufacturer Code number
Sony Ol (de fauh)
Akai 04
AOC 04
Centurion 12
Coronado 03
Cmtis-Mathes 12, 14
Daewoo 04, 22
Daytron 03, 12
Fisher 11
General Electric 04, 06. 10
Gold StariLG 03, 04. 17
Hitachi 02, 03.04
J.C.Penney 04, 10. 12
JVC 09
KMC 03
Magnavox 03, 04, 08, 12, 21
Marantz 04, 13
MGAiMitsubishi 04. 12. 13, 17
NEC 04, 12
Panasonic 06, 19
Philco 02, 03, 04, 08
Philips 08, 21
Pioneer 06, 16
Portland 03
Proscan 10
Quasar 06, 18
Radio Shack 05, 10, 14
RCA 04, 10
Sampo 12
Samstmg 03, 04, 12, 20
Sanyo 11, 14
Scott 12
Sears 07, 10. 11
Shm_ 03, 05. 18