Sony RDR-HX900 Operating Instructions Manual page 70

"(hange OUT": Allows you to change the
OUT point, and repeat from step 9.
To add more scenes, select "Add" and go to
step 6. To preview all of the captured scenes in
the listed order, select "Preview."
13When
you finish editingthe Scene List,
select "OK," and pressENTER.
The display _r entering the title name
appears. To enter a new name, select "Enter"
(see page 43).
14Select
"OK" to use the default name, and
press ENTER.
To play the Playlist title
Press TOOLS while the Title List menu is mined
on. Then, select "Playlist" and press ENTER.
When the Title List (Playlist) menu appears, select
a title and press C:> PLAY.
"_° Hint
Whena Playlisttitleis created, the IN and OUT points
will become chaptermarks, and eachsc_lewill become
a chapter.
The pictme may pause when the edited scene is played
Moving a Playlist title (Move Title)
You can change the Playlist title order within the
Title List (Playlist).
1
Press TITLE LIST to turn on the Title List
(Playlist) menu.
If the Title List (Original) menu appears, press
TOOLS and select "PlaylistF'
2
Select "Number" in the "Sort" column,
and press ENTER.
The titles are sorted in order of title munber.
3 Select a title, and press ENTER.
The sub-menn appears.
4 Select "Move Title," and pressENTER.
p_ 2oh /:0_p_4 2_ooPf_ we_ 9/_t5 I
W_ere_o you _,_nt t_ n,_',e_histitle?
" 2 5ch 800A_ 900Abl Fri _j;"7 _
5 Select a new location for the title by
pressing '1'/!, and press ENTER.
The title moves to the new location.
Dividing a Playlist title (Divide Title)
1
Press TITLE LIST to turn on the Title List
(Playlist) menu.
If the Title List (Original) menu appears, press
TOOLS and select "Playlist."
2
Select a title, and press ENTER.
The sub-meml appears.
3
Select "Divide Title," and press ENTER.
The display for setting the dividing point
appears. The title starts to play in the
background.
i Divide _ 2ch /:00PM 200P1_
4
5
6
i D _ 012¸34
Select the dividing point by pressing
_t_I/I=H_, and press ENTER.
The display asks lbr confirmation. To change
the dividing point, select "Change."
Select "OK," and press ENTER.
The display for entering the title name
appears. To use the same title name as beibre,
select "No."
Select "Yes," and press ENTER to enter a
new name.
Follow the explanations on page 43. After you
enter a new name, the title is diYided in two.
70