Sony RDR-HX900 Operating Instructions Manual page 86

Follow steps 1 to 3 of"Using the Setup
Displays" (page 83) to select "Settings" in the
Setup Display.
Select "Area Setup," and press ENTER.
Sef! ngs - Area Setup
[u .......... %_A "1
7ip Code
3 Select"USA,(anada," and press ENTER.
4 Select vour country, and press ENTER.
5 Select"Zip (ode," and press ENTER.
I Area Setup - Zip code
Ener your zip ode
O[s Is Is Is
6 Enter your zip code number nsing the
_, "_ buttons, and press ENTER.
7 Select"OK," and press ENTER.
Clock
Manual Clock Set
Sets the clock mannally.
1 Follow steps 1 to 3 of"Using the Setup
Displays" (page 83) to select "Settings" in the
Setup Display.
2 Select"Clock," and press ENTER.
Settings - Clock - Present Time
Set the tree and date manually
3
Press to set the month, and press "_.
Set the day, year, hour, and minntes in
seqnence. Press _/"_ to select the item to be
set, then press _/_, to set the numbers. The
day of the week is set automatically.
4 Press ENTER to start the clock.
"_° Hint
To change the nmnbers in step 3, press _ to return to the
item to be changed, and select the mmlbas by pressing
ti#.
If the clock data is received automatically, "Clock"
caimot be selected flom "Settings" in the Setup Display.
Set Top Box Control
You can control your cable box/satellite receiver
using the supplied set top box controller. See
"Step 7: Easy Setnp" for details.
Set Top BoxControl
On
Off
Turns on the cable box/satellite
receiver control fmlction. See
"Using the cable box/satellite
receiver control function"
(page 12).
Turns off the cable box/satellite
receiver control ftmction. Select
this if you do not want to use the
supplied set top box controller.
When "Set Top Box Control" is set to "On," you
can make the following settings. Note that when
you change "Set Top Box Control" to "On" or
"Off," all of the timer recording settings will be
canceled.
eBrand Code
See "Cable Box/Satellite Receiver Brand (ode"
(page 112) for the brand code for yonr cable box
or satellite receiver, and enter the code using the
number buttons and ENTER.
eConnection
Selects the connection you used for yonr cable box
or satellite receiver. When the cable box or
satellite receiver is connected to the recorder's
LINE IN jacks, select the connection from
"Line 1," "Line2," or "Line3." When the cable box
or satellite receiver is connected to the recorder's
VHFiUHF IN jack, select the output channel,
"Ch2," "Ch3," or "Ch4."
eCh. digit lock
Allows you to select whether to i"ix the digits for
yonr cable box or satellite receiver.
Off
Select this when your cable box or
satellite receiver only- accepts a
three or more digit chalmel
number. Normally select this.
86