Table of Contents
Advertisement
HOW TO SETUP YOUR NEW HITACHI PLASMA TELEVISION
SPEAKER INSTALLATION
42"
1.
Screw the speaker holder to the speakers as shown below.
SPEAKER INSTALLATION 50"
1.
Screw the speaker holder to the speakers as shown below.
Speaker Holder
Screw x2
(R)
_
,_
[__er
"_"'_
Screw x2
2.
Loosen 4 screws (A) (two on the left and two on the right).
3.
Completely unscrew 4 screws (B) (two on the left and two on
the right).
4.
Hook the speaker holders to the loosened screws (A).
5.
Screw
the speaker
holders to the Display
Monitor with
screws (B).
6.
Tighten screws (A).
(R) Speaker
Loosen ._
,_..,._ _
Unsmc_letwe(IB)
_A_ew_
"_
Bottom View
of Speaker
Holder/_//h_
Hook this
// / /,,,,=
portion to the
//
/{_I_ '
loose screws
//_
(A).
'_
Insert
horizontally from
the side
Screw in
screws (B)
Speaker Holder
(R)
Screw x2
(R)
(L)
/
Screw x2
2.
Screwin
screw (C).
3.
Hook the upper speaker holder to the screw in (C).
4.
Screw in the lower speaker holder (D).
5.
Tighten screws (C) and (D).
Screw in
screws (C)
Screw in
screws (D)
7.
Connect the speaker wires as shown below, (Make sure the
core is toward the display monitor side,)
6.
Connect the speaker wires as shown below. (Make sure the
core is toward the display monitor side.)
U
Ferrite Core
NOTES:
Do not connect speakers simultaneously to the speaker terminal of the Plasma TV and an external amplifier.
5
Advertisement
Table of Contents
