Table of Contents
Advertisement
RGB ON SCREEN DISPLAY
4. Other signal formats may not be displayed correctly.
Use AUTO ADJUST to automatically adjust the horizontal position, vertical posi_
tion, clock, and phase.
We recommend you use a signal which has more than 50% of amplitude of white area at each corner of
the picture, when performing Auto Adjustment.
it may not work correctly with dark picture (see page 72).
5. Input signal level.
RGB INPUT
i0.TVppi1.0Vpp
J NOTE:
Interlaced signal is not available.
6. RGB input signal will not appear at all when receiving a signal which is not supported by this product
If the setting is wrong, the
Display Monitor will display:
NO SYNC. SIGNAL
======
INVALID SCAN FREQ
i
J
Without sync
POWER SAVING mode will come
on after 10 seconds.
Either horizontal or vertical
frequency is inappropriate
or out of range.
INVALID SCAN FREQ. will disappear
after 60 seconds.
I NOTE:
1. If the Display Monitor cannot display a signal, please try AUTO ADJUST to display the signal.
This is used to initialize
the MultiScan Converter.
2. Not all signals have AUTO ADJUST feature (see page 72).
3. Set-Top*Box and DVD player input signal does not have AUTO ADJUST feature.
67
Advertisement
Table of Contents
