HP R85026A Manual page 6

SAFETY eONSIDERATf
Become familiar with all safety instructions in this manual before you use the HP R85026A detector. This
product was designed and tested in accordance with international standards.
Safety Symbols
WARNING
This indicates a personal hazard. WARNING calls attention to a procedure, practice, etc., that, if not
performed correctly, can cause personal injury. Do not continue past a WARNING until you fully understand
and meet the stated conditions.
This indicates a mechanical hazard. CAUTION calls attention to an operating procedure, practice, etc.,
that, if not correctly performed or adhered to, can cause damage to (or destruction of) part or all of the
instrument. Do not continue past a CAUTION until you fully understand and meet the stated conditions.
CAUTION
The accessories supplied with the HP R85026A detector are shown in Figure 1-1.
Instrument Case
To protect the HP R85026A, when not using the detector, store it in its case.
Hex Balldriver
Use the 3/32 inch hex balldriver to tighten or loosen hex screws when making waveguide connections.
When the HP R85026A is not in use, protect the waveguide with the flange cover.
Cable Markers
When you use more than one detector in a test setup, use the cable markers for identification.
General Information HP R85026A