Tv Receiver - Sony FD Trinitron WEGA KV-32XBR400 Operating Instructions Manual

Installing the TV
Connecting a
Be sure to read the
manual for the Set-top box.
Digital TV Receiver
1
Using three separate component video cables, connect the Digital
TV Set-top box's Y, PB, and PR jacks to the TV.
_:a TheY,PB,and PRjacks do not provide audio, soaudio cables must be connectedto
provide sound.
Component input (Y, PB,and PR)is recommendedfor optimum picture quality. You
may also use component video or S Video connections.
2 Using an audio cable, connect the DTV Set-top box's audio OUT
jacks to the TV's audio IN jacks.
• ,TI
Component video cables
1
DTV Set-top box
1 v_o
_ AUDIO-R (red)
AUDIO-L (white)
Audio cable
TV
@
AUX
@
TO
CONVERTER
@
VHFIUH_
Connecting a Camcorder
1
Using A/V cables, connect the camcorder's A/V OUT jacks to
the TV's A/V IN jacks.
If you have a mono camcorder, connect its left audio output to the TV's AUDIO k jack.
For easyconnection of the camcordero the TV has front A/V inputs (shown below).
However, if you prefer;you can also connect the camcorderto the TV's rear AIV IN jacks.
S VIDE_ _)
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow) --
17