Table of Contents
Advertisement
en-us_main.book.book Page 17 Wednesday, July 12, 2023 4:56 PM
2
Insert the vacuum cleaner into the product.
3
Press the Start/Stop button. The dust
emptying (replace bag) icon flashes white,
and the dust emptying operation begins
along with a melody. Do not try to remove the
vacuum once the operation starts.
4
When the dust emptying operation is
complete, a melody sounds, the dust
emptying (replace bag) icon turns off, and the
vacuum cleaner starts charging.
WARNING
• Do not wash the vacuum cleaner body or the
inlet with water. If water enters the built-in
motor, it can cause electric shock or fire.
CAUTION
• Do not forcibly remove the vacuum cleaner
during the dust emptying operation. Because
the vacuum cleaner is mounted, the product
may break or fall, causing injury or product
damage.
- Remove the vacuum cleaner after the dust
emptying (replace bag) icon in the status
display is turned off completely.
• Do not put foreign objects such as hands,
garbage, or toys in the dust suction area of the
product without a vacuum cleaner mounted.
• Do not push, pull, or lean on the product; it may
fall, causing injury or damage.
• Do not put objects like smartphones on the
product's control panel. The product may
malfunction due to vibration, or the object may
fall to the floor, causing injury or damage.
• If the power suddenly turns off during the dust
emptying operation, the vacuum cleaner is
mounted and cannot be removed. Causes for
power loss include a power outage, a turned off
power strip, an unplugged power cord, and a
tripped circuit breaker.
• After the power comes back on, remove the
vacuum cleaner when the settings on the
vacuum cleaner mounting unit are reset.
NOTE
• The sound of the high-performance motor may
be louder than the cordless vacuum cleaner. It is
normal to hear sounds such as the vacuum
cleaner, dust bin cover opening, product
operating unit, and suction.
• The vacuum cleaner mounting unit of the
charging station is cleaned with a stronger
suction force just before the dust emptying
operation is over. The sound may increase, but
this is normal and not a fault.
• During the dust emptying operation, the product
is not charged for safety reasons.
• For best results in areas with extra hair or pet
dander, empty the vacuum dust bin more often
during cleaning.
• Replace the dust bag every month to maintain
the dust emptying performance. The
replacement cycle may vary depending on the
environment, and may be especially short in
conditions with a lot of dust or pet hair.
• The dust bin may not be emptied completely
under certain conditions (very full, contains long
hairs, etc.). If this happens, press Start/Stop to
repeat the emptying process.
• Clean the dust bin's inside, the easy dust
emptying lever and the large dust separator to
remove the remaining dust. For more
information, see the vacuum cleaner owner's
manual.
OPERATION
17
Advertisement
Table of Contents
