Panasonic AG-6124 Service Manual page 20

OPERATING INSTRUCTIONS
1-2-3. Auto Off Operation & Error Code
ERROR CODE CONTENS CAUSE CONDITION
1. If it is in POWER OFF mode,the mode turns to POWER ON
and "d" indication.
2. If a tape is inserted,the mode turns to middle EJECT postion
and the cylinder rotates.
3. Dew condensation continues for about 120 minutes.
4. After cancelleating condensation,if a tape is inserted,the mode
turns to STOP.
CONDENSATION
(DEW)
. If the motor is locked for about 2-5 seconds during front
loading, the motor is unloaded.
2. If the motor is locked for about 2-5 seconds during front
unloading, the motor is unloaded after loading. Then if it is
locked for about 2-5 seconds, the mode turns to AUTO OFF
and "E-2" indication.
FRONT LOADING
LOCKED
. If the mode is locked for about 5 seconds during loading,
it is unloaded. Then if it is loaded and locked again, the
mode turns to AUTO OFF and "E-3" indication.
. If the motor is locked for about 2-5 seconds during unloading,
the mode turns to AUTO OFF and "E-3"" indication.
bo
LOADING LOCKED
. If the motor is locked for about 5 seconds in cylinder
rotating mode, the mode turns to AUTO OFF and "E-4"
indication.
CYLINDER LOCKED
. If the reel rotation is locked during tape running, the motor
in unloaded once. Then if the rotation is locked through the
trying to load, the mode turns to AUTO OFF and "E-5"
indication.
REEL LOCKED
1—17