Panasonic AG-6124 Service Manual page 84
Time lapse recorder vhs pal
Hide thumbs
Also See for AG-6124:
- Operating instructions manual (68 pages) ,
- Operating instructions manual (68 pages)
Advertisement
Upper Cylinder Removal
1.
Remove the earth plate with the cable from the
cylinder stator P.C.Board. (Figure M1-1)
TOP VIEW
Screws (B)
CYLINDER
-
ROTOR UNIT
UPPER CYLINDER
Fig. M1-1
2.
Unscrew 2 screws (A) so that the cylinder stator
unit can
be removed
from the cylinder unit.
(Figure M1-2)
CYLINDER RETAINER
TOP VIEW
WW
T=
CYLINDER
STATOR UNIT
Fig. M1-3
UPPER CYLINDER INSTALLATION
1.
Install the upper cylinder unit and retainer.
2.
Adjust the position of the retainer so that the 2
Fig.M1-2
screw holes on the retainer becomes as shown
:
:
Figure M2-1.
3.
Unscrew 2 screws (B) so that the cylinder
:
;
2
rotor unit can be Ashi (Figure M13)
3.
Tighten 2 preci (C) while strongly press ing
4.
Loosen the hex screw (C) in the cylinder
down the retainer. (Figure M2-2)
'
retainer by using a 1.5mm hex wrench so that
(If the pressing force is not enough, rs tape
the cylinder retainer and upper cylinder unit can
Interchangeability: May (be 'Gut of specines ran
be lifted and removed. (Figure 1-4)
and the life of upper cylinder becomes shorten.)
Advertisement
