Cycle Cup Replacement; Six-Month Cleaning; Closing The Fabric Freshener For Storage - Whirlpool LRF4001RY Use And Care Manual

Fabric freshener
Hide thumbs Also See for LRF4001RY:
Table of Contents

Advertisement

Available languages

Available languages

Cycle Cup Replacement

It is recommended that the cycle cup be replaced every
6 months. For replacement parts, see "Accessories."

Six-Month Cleaning

It is recommended that the Fabric Freshener be cleaned with
vinegar every 6 months.
1. Remove cycle cup from cup receptacle and place to the side
for later use.
2. Remove any garment(s) that may remain in the Fabric
Freshener.
3. Fill cleaning cup (provided) to Fill Line with vinegar.
Cleaning cup for vinegar only.
4. Place cleaning cup into cup receptacle. Press down on the
cleaning cup to be sure cleaning cup is firmly in place.
5. Close the bag zipper completely.
6. Press and hold the ON/OFF button for approximately
1 second while the Start/Steaming indicator light glows. The
cleaning cycle will begin.
7. After the Complete indicator light is lit and the cleaning cycle
is finished, unzip bag and remove cleaning cup from Fabric
Freshener.
8. Fill cycle cup to Normal level with room temperature, distilled
water.
9. Place cycle cup into cup receptacle. Press down on the cycle
cup to be sure cycle cup is firmly in place.
10. Close bag zipper completely.
11. Press and hold the ON/OFF button for approximately
1 second while the Start/Steaming indicator light glows. The
cycle will begin.
Start/Steaming, Gentle Drying, Cooling, and Complete indicator
lights will light as each cycle progresses through each stage.
Once the Complete indicator light is lit, the cycle is complete and
the Fabric Freshener has completed the cleaning process. The
unit is now ready for normal operation.
NOTES:
For cleaning, use vinegar only.
Do not place clothing items in Fabric Freshener during the
cleaning cycle.
Sounds from the internal fan are normal during operation.
The temperature and humidity in the immediate surrounding
area may increase slightly.

Closing the Fabric Freshener for Storage

NOTE: Fabric freshener should be completely dry before storing.
Running a Dry cycle before closing the Fabric Freshener is
recommended.
1. Unplug Fabric Freshener from outlet and wrap cord on cord
storage wrap located on the back of the unit.
2. Remove any garment(s) that may remain in Fabric Freshener.
3. Zip bag approximately halfway open to allow for air to escape
as you close Fabric Freshener.
4. Hold the top of Fabric Freshener while, at the same time,
pulling the handle toward you to disengage the handle pin
from the slot in the pole top support.
5. Lower top of Fabric Freshener onto bottom of Fabric
Freshener.
NOTE: Be sure that the bag is completely tucked under top
of Fabric Freshener to avoid damage.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents