Installation Instructions; Unpack Fabric Freshener; Parts And Features; Set Up Fabric Freshener - Whirlpool LRF4001RY Use And Care Manual

Unpack Fabric Freshener

1. Remove Fabric Freshener from box.
2. Save box and all packaging materials in case service is
needed in the future.

Parts and Features

F
K
J
I
A. Steel pin E. Blue support
B. Cord storage wrap
(located below pole) F. Release latch
C. Pole G. Bottom of Fabric
D. Pole extension button
H. Pole handle

Set Up Fabric Freshener

Unwrap Cord
1. Unwrap cord from cord storage wrap located on the back of
the Fabric Freshener, below the pole.
WARNING
Fire Hazard
Do not use an extension cord.
Doing so can result in death, or fire.
2. Plug power cord into outlet.

INSTALLATION INSTRUCTIONS

B C
A D
G
H
I. Cycle cup for
bracket distilled water
only
J. Top of Fabric
Freshener
Freshener
K. ON/OFF button
Extend Fabric Freshener Pole
IMPORTANT: Pole will not rotate to vertical position until pole is
extended to the black line. Be sure bottom section of the pole is
fully extended to the black line to avoid product damage.
E
A
F
A. Grip the pole over the green dot.
1. Grip the pole over the green dot and extend the pole straight
out in the direction shown by the arrow to the black line on
the pole.
NOTE: Pole will not rotate to vertical position until pole is fully
extended. Be sure second section is fully extended to the
black line before proceeding to Step 2.
A. Extend the second section of the pole to the black line.
2. Holding the pole firmly in place, rotate the pole to a vertical
position.
12" (30.48 cm)
A
5