Sharp FLASH PATH VR-1FPN Operation Manual page 16

Using the FlashPath
Status message display
The status messages are text messages indicating the
details of the status.
Version information
This indicates the program's version information.
Caption
Different messages are displayed here, depending on the
situation.
Normally: FlashPath status monitor
After a change of status is detected: The FlashPath user
must be selected. On the status icons, the signal of the part
for which the error is detected changes from green to red.
13
Description of status messages
Messages appear on the status message display under the
conditions described below.
[Windows 95/98 Operating System]
When the FlashPath has not been detected even once:
"No FlashPath has been detected in any drive."
Under normal conditions:
"The FlashPath is functioning normally."
When the remaining battery power is low:
"FlashPath Battery Low."
When there is no SmartMedia in the FlashPath or the
SmartMedia is inserted backwards:
"The SmartMedia is inaccessible."
When the FlashPath has switched to the shutdown
mode:
"Eject and re-insert the FlashPath."
When the SmartMedia's internal format is not compatible:
"Invalid SmartMedia"