Figure 11
Figure 11 ATM NIC Front Panel
You can configure and monitor ATM interfaces with Voyager, the Web-based
configuration and monitoring application. For information about how to
access Voyager and the related reference materials, see Voyager Inline Help or
the Voyager Reference Guide.
Connectors and Cables
To connect the card to an ATM device, use a multimode fiber-optic cable.
The Link LED on the NIC glows green when a link is established.
E1 NIC Specifications
The IP500 Series appliance supports an E1 NIC with the following features:
Provides direct high-speed access over a leased line
Supports operation at 2.048 Mbps
Supports up to 30 channels
Built-in channel service unit or data service unit (CSU/DSU)
Fractional E1
Tracing through
IP500 Series Installation Guide
All manuals and user guides at all-guides.com
shows an ATM NIC.
tcpdump
E1 NIC Specifications
ATM connector
Link LED (green)
00093
55