Frigidaire FHWH184WB2 Use & Care Manual page 17

PUREAIR FILTER(sold separately):
TM
This unit can be used with PureAir
which can be purchased by scanning the QR
code behind the air inlet grille, by visiting
Frigidaire.com, or by calling Frigidaire Customer
Service Center
1-800-265-8352 (Canada).
PUREAIR FILTER INDICATOR:
TM
Note: The PureAir
TM
white, if a PureAir filter is installed.
TM
RESET PUREAIR FILTER LIGHT:
TM
DO THIS:
HOLD SLEEP BUTTON
5 SECONDS
After 1440 hours of operation the PureAir
Filter indicator will turn red. To reset, replace
with new PureAir Filter, then hold the "Sleep"
TM
button 5 for seconds.
DIMMING DISPLAY:
After 60 seconds of inactivity, the display and indicator lights will turn o . Press any button
on the control panel or remote control, and the display will illuminate. Please note that if the
unit is in Eco mode and the set temperature has been reached, the unit may appear o .
However, the unit is on and will continue to sample the air temperature every 10 minutes. To
confirm, press any button on the control panel or remote control.
OPERATING INSTRUCTIONS
Filters,
TM
1-800-944-9044(US)
White light
Filter indicator will glow
Red light
SLEEP FEATURE:
/
YOU WILL SEE:
The display will show SL for 3 seconds. Then,
the display, indicator lights, and the air
quality light will turn o .
In this mode, the unit will automatically select
the Auto fan
temperature will increase by 2 °F 30 minutes
after sleep mode is selected. The temperature
will then increase by another 2 °F after an
additional 30 minutes. This new temperature will
be maintained for 7 hours before it returns to the
originally selected temperature. This ends the
"Sleep" mode and the unit will continue to
operate as originally programmed. The "Sleep"
TM
mode program can be cancelled at any time
during operation by
button, "Fan" or "Mode" button.
DO THIS:
PRESS SLEEP
BUTTON
speed, and the
pressing the "Sleep"
17
selected