Table of Contents
Advertisement
20
OPERATING INSTRUCTIONS
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating
procedure, here are more features in your
control that you should become familiar with.
NOTE
The "Cool" circuit has an automatic 3
minutes time delayed start if the unit is
turned o
and on quickly. This prevents
overheating of the compressor and possible
circuit
breaker
continue to run during this time.
• There
is
a
2-Second
compressor shutting down when selecting
FAN ONLY. This is to cover the possibility
of having to roll through to select another
mode.
• The
control
will
temperature within 2 degrees Fahrenheit,
between 60°F and 90°F degrees.
• After
a
power
memorize the last setting and return the
unit to the same setting once power is
restored.
• The
unit
should
temperature range of indoor side 60°F -
90°F (16°C - 32°C), outdoor side 64°F -
109°F (18°C - 43°C). Performance may be
reduced
outside
temperatures.
Fresh Air Vent Control (on some models)
The Fresh Air Vent allows the air conditioner
to:
1. Recirculate inside air - Vent Closed (see
Fig. 1)
2. Draw fresh air into the room - Fresh Air
(see Fig. 2)
3. Exchange air from the room - Vent Open
(see Fig. 3)
tripping.
The
fan
delay
for
maintain
the
outage,
the
unit
be
operated
of
these
operating
Figure 1 (VENT CLOSED)
will
the
set
will
in
a
Air Directional Louvers
Air directional louvers control air flow
direction. Your air conditioner has the louver
type described below.
Slider Type
The louvers will allow you to direct the air
flow Up or Down and Left or Right
throughout the room as needed. Drag the
adjuster lever until the desired Left/Right
direction is obtained. Pivot horizontal louvers
until the desired Up/Down direction is
obtained.
Figure 2 (FRESH AIR)
Figure 3 (VENT OPEN)
ADJUSTER LEVER
(6-WAY)
Advertisement
Table of Contents
