Table of Contents
Advertisement
18
OPERATING INSTRUCTIONS
TO ACTIVATE TIMER FEATURE:
DO THIS:
PRESS TIMER
BUTTON
TO SET TIMER
DO THIS:
PRESS UP/DOWN
BUTTONS
Note: For Delay Stop or Start, press the Timer
button when the unit is in the On or O position.
Then tap or hold the "
change delay timer at 0.5 hour increments, up to
10 hours, then at 1 hour increments up to 24
hours. After 5 seconds, the control will count
down the time remaining until Stop or Start (8h,
7.5h, 7h, etc.).
Pressing the unit On/O button at any time will
cancel the Delay Start/Stop function. Or press
the timer button for 2 seconds
TO CHANGE THE TEMPERATURE SCALE
(°F OR °C):
DO THIS:
PRESS AND HOLD THE UP/DOWN
BUTTONS SIMULTANEOUSLY
FOR 3 SECONDS
" or "
" button to
YOU WILL SEE:
Your AC is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius.
HEATING FEATURE:
DO THIS:
PRESS MODE BUTTON
CHOOSE HEAT
YOU WILL SEE:
Note: This feature can be used with any
combination of FAN Speeds (Low speed only
on 8000 BTU models), Timer, or Sleep
Modes. When in the "Heat" mode, the fan will
run continuously while heat is needed. When
the room set temperature is satisfied, the fan
will cycle o
and on to circulate and sample
the room air.
Advertisement
Table of Contents
