Table of Contents
Advertisement
could be done by tying it to the tap with a piece
of string or attaching it to the wall.
•
In a sink drain pipe branch.
This branch must be above the trap so that the
bend is at least 60 cm above the ground.
•
Directly into a drain pipe at a height of not
less than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the
drainpipe must be larger than the outside
diameter of the drain hose. The drain hose must
not be kinked.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece
is available from your local Service Centre
BUILDING IN
OVERVIEW
This appliance has been designed to be built into
the kitchen furniture. The recess should have the
dimensions shown in the picture below:
600 mm
min.
560 mm
min.
820 mm
75 mm
60 mm
We recommend that you keep the
packaging and the transit bolts for any
movement of the appliance.
PREPARATION AND ASSEMBLY OF THE
DOOR
The appliance is originally prearranged for the
assembly of a door opening from right to left (see
picture below)
20
596 mm
555 mm
818 mm
170 mm
100 mm
Door
•
- width 595-598 mm
•
- thickness 16-22 mm
The height X depends on the height of the adjacent
furniture's base.
Advertisement
Table of Contents
