Kenwood DNX7120 Instruction Manual page 85

Setting uppower specification ofthe external
device for w hich the power is controlled from
this unit.
Display the EXT SW SETUP screen
Touch in the "SETUP
Menu" screen (page 62).
Perform EXT SW Setup
Setting EXT SW Control 1 (EXT SW1 )
i I Sets the name of the external device. See
Setting EXT SW Control 2 (EXT SW2)
The setup method is the same as "EXT SW1"
<Character Entry> (page 49) for information
on how to enter the name.
[2] Sets the power signal output mode.
(_) EXT SWl: Pulse, EXT SW2: Level)
Pulse: Generates a single power signal
pulse.
H
Level: Continues output of high power
signal
Sets to turn output on/off each time the
button on the EXT SW Control screen is
pressed.
i3] Sets the Pulse signal output time.
Outputs 500ms when "1" is set. Increases
by 200ms with each step. Up to 100 steps
can be set.
j4 Returns to the original screen.
English @ 85