Kenwood DNX7120 Instruction Manual page 86

Displays the Audio Control menu toset the sound
effect function ofthis unit.
Display the control screen of any source
Press several times until tile control screen
appears.
Display the Audio Control
menu
Select the Audio Control item
ill Switches to the selected Audio Control
screen,
86 @ DNX7120/DDX712/DDX7032
You can adjust the front/rear and right/left audio
balance.
Display Audio Control screen
Touch in the "Audio
Control Menu" screen (page 86).
Set the each item
1 Moves to the "Audio Control 2" screen.
j2 Adjust the front/back and left/right volume
around the touched area.
j3] Adjusts the right and left volume balance.
j4 Adjusts the front and rear volume balance.
j5] Turns the Loudness control function On or
Off.
If turned "On", high and low tones are
automatically enhanced during low volume.
j6] Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3,WMA or AAC) is displayed.
iT] Returns to the "Audio Control Menu" screen.
is] Returns to the "Audio Control 1" screen.
j9] Adjusts the volume of the present source
based on the difference level of original
volume.