Advertisement
3
Connecting Cables
The cable connections of Box series endpoints are basically the same. The following uses the rear panel of the Box 610 as an example.
For details about the ports, see Product Structure > Rear Panel in the Product Description.
HD-AI cable
(comes with the microphone)
Connecting to the IN port of the microphone
Connecting to the IN port of the microphone
To cascade multiple microphones, see the Quick Start
delivered with the microphones.
4
Power-on Check
1
After the power supply is connected, turn the power switch to ON and check the indicator status. If the status is abnormal, contact the local supplier.
2
Check whether the camera, microphone, and display are working properly.
SIP NO.
！
075599990
SIP NO.
！
075599990
HDMI cable
The Box 610 series has two more HDMI ports than the Box 310 series.
Camera 500 is used as an example here. For
details about how to connect the camera to
an endpoint in other ways, see Installation
and Configuration > Specialized Topic >
Connecting a Camera in the Box series
endpoint product documentation.
Blinking green
Indicator
Off
twice per second
Status
Powering on
Powered off
HDMI cable
Network cable
(prepared separately)
Touch network cable
For alternative methods of connecting
the Touch to the endpoint, see
Setting Parameters on the Touch >
Connecting the Touch to an
Endpoint in the configuration guide
of Box series endpoints.
Blinking green (breathing light,
Blinking green
Steady green
gradually brighter or dimmer)
four times per second
Upgrading
Working properly
If the Box is installed in a cabinet, use
a ground cable to connect the Box's
ground port to the cabinet's.
Recommended cord specification:
0.75 mm²/18 AWG.
Ground cable
(prepared separately)
Power off the Box
before connecting
any cables.
Network cable
Power cable
Steady red
Blinking red
Sleep
Faulty
Muted
Advertisement
