Panasonic NH-EH90JD1WA User Manual page 13

Maintenance and service
Humidity sensor
Unplug the dryer before cleaning and clean the surface of the sensor (metal strip) inside
the dryer with a soft cloth.
To ensure proper drying performance, please
●
clean the surface of the sensor inside the feed
opening regularly.
Dust accumulated on the sensor will interfere
●
with the measurement of dryness and lead to an
increase of drying time.
警告
Warning
- Do not use steel or other rough materials for cleaning.
Dryer door gasket
The following actions should be done at the end of each
drying cycle:
- Remove debris from the dryer door gasket.
The debris may make it impossible to close the door tightly.
●
- Open the dryer door for ventilation and drying at
appropriate time.
Violation of the requirement may cause abnormal odor.
●
Warning Warning
- Do not remove the rubber parts from the door.
Cooling air inlet cleaning
1. If dust accumulates at the air inlet on the front side of the
product, please clean it with a damp cloth.
Accumulated dust will ow into the product, which may
●
cause abnormal operation or re, please clean dust timely.
23
Sensor
Upper lter screen
In order to reduce the drying time and save energy, please clean the upper lter before
and after each drying cycle.
Internal lter and external lter
1. Open the door and pull the external lter upwards.
2. Open the external lter case and pull the internal lter upwards.
3. Each lter should rst be cleaned with a brush, then cleaned with water.
4. After the lter is dried, put the internal lter back into the external lter and
reinsert it into the original position.
- To avoid damage, please pay attention to the direction when installing.
- The color of the lter may change during use, which will not a ect normal use.
警告
Warning
- Do not use the dryer without the lter!
- When the dryer is powered on, the indicator light
remind the user to clean the lter in time.
- When the indicator ashes and the dryer stops working during operation,
please open the door to clean the lter screen, then press the start/pause button to
restart the dryer.
Internal lter
External lter
ashes for several times to
24