Table of Contents
Advertisement
Description of the operation panel
8
7
6
5
4
1. Power
Press this button to turn the power on and o . If the dryer is idle for 5 minutes after
being powered on, the power will be turned o automatically.
When this dryer is running, press and hold the power button (for about 3 seconds) to
shut down.
2. Start/Pause
Press this button to start or pause the program.
3. Easy Iron
Press this button to set the Easy Iron function.
Press this button to enable or disable the Easy Iron function, while the indicator light
is constantly on or o .
After selecting the Easy Iron function, when the dryer has nished drying, the screen
shows End. If the user does not take out the clothes, the dryer runs intermittently to
rotate the drum, reducing the wrinkles formed by the long-term piles.
4. Timer
This button is for adjusting the drying time.
5. Program/Mode
Press the
and
to choose the program that suits your needs.When a program
is selected, it ashes. (Please refer to pages 19 and 20)
6. Preset
Preset is available to set the end time of the program. In standby mode, press the
button to enter the Preset setting state, then press the button to select the desired
Preset time.
7. Dry Level
Press this button repeatedly to select the dryness level.
The higher the number of Dry Level, the drier the clothes
(1 for ironing, 2 for ready-to-wear, 3 for storage).
Ironing: the fabric has certain humidity, it is suitable for manual ironing after it is taken out.
13
3
Ready-to-wear: the fabric is dry and suitable for wearing or use.
Storage: the fabric is completely dry and suitable for cabinet storage.
8. Remaining time indication
It shows the approximate time left before the program ends.
※Subject to in uence of factors such as the type of clothes, temperature conditions
and program selection, the time displayed during operation may be changed at any
time, and the actual running time may be slightly di erent from the displayed time.
2
1
10
9. Status indicator
The following icons are displayed by indicator lights and cannot be selected.
Indicator light
10. Child lock
While powered on, press and hold the "Dry Level" for 3 seconds, you can enable child
lock function. The child lock indicator light
function is turned on, and buttons other than the power button will remain locked.
Even while powered o , it also remains locked. While powered on, press and hold the
"Dry Level" for 3 seconds at any time, you can unlock it.
9
Description
The indicator light is on to indicate that the Child lock is turned on.
The indicator light is on to indicate that the Preset function is turned on.
The indicator light ashes to indicate that the condensed water box
is full and should be emptied.
- Pull out the condensed water box, pour out the water, then put it
back in place. (Please refer to page 21)
The indicator light ashes to indicate that the lter is blocked and
should be cleaned. (Please refer to page 24)
- Open the dryer door, clean the lter and put it back in place.
The indicator light is on to indicate that the Easy Iron function is turned on.
The indicator light ashes to indicate that the Easy Iron cycle is running.
is constantly on to show that the
14
Advertisement
Table of Contents
