Table of Contents
Advertisement
When the clothes drying e ect is not good
Under such
circumstances
- Some clothes can be washed but are not suitable for
drying.
Deformation of
- Before drying, please check the laundry symbols on the
clothes
clothes.
- Please con rm whether the lter is cleaned before putting
in clothes.
There is cotton
- Please separately dry clothes that are prone to generate
lint on the
clothes
lint or are prone to be stained with lint.
- Con rm there are no articles in clothes pocket.
Clothes are
- Select the right drying program as per the type of clothes.
wrinkled
- Whether there are too many clothes in the drum.
- Reduce the amount of laundry for drying.
Some clothing
has residual
- Turn the clothes over, then try drying them again.
moisture
- Please dry clothes of similar thickness together.
- When there are smelly articles such as strong detergent,
paint or varnish around, smell may enter the dryer with
There is a smell
accompanying air. If there is such smell in the air, please use
the dryer after ventilating.
27
What to do
Problem
- Power failure, blown fuse, or circuit breaker tripped.
- The power plug is potentially not properly inserted into
power socket.
The dryer does not work
- Whether power supply is turned on?
- Whether the "Start/Pause" button is pressed?
- Whether dryer door is properly closed?
- Settings cannot be changed during drying. If it is
necessary to change the settings, please turn o the dryer,
The buttons do not
work
and restart it for setting.
- Whether the child lock is turned on? (Refer to page 14)
- This is not a failure; when the "Easy Iron" function is set,
Intermittent operation
the inner drum rotates slowly and intermittently.
Synthetic clothes
- When rinsing clothes, addition of fabric softener for
generate static
rinsing clothes can reduce electrostatic charge.
electricity after drying.
- The indicator light may ash even after the lter is
The lter is not blocked,
cleaned. this is not a failure; at the end of the drying
but the light for lter
process, the lter clogging warning light will ash to
still ashes.
remind the user to clean the lter.
- The remaining time is continuously calculated and
The remaining time
adjusted during operation. Therefore, the displayed time
displayed changes.
may change.
The running
- This is normal; it is a change caused by the on/o of the
sound changes.
compressor and the drainage pump.
- This is not a failure; it is used to remind the user that
Display of "
" after
drying is completed, but the temperature in the inner drum
the program is
is high, and air will be supplied for cooling for 3 hours at
completed.
maximum.
Trouble shooting
Possible solution
28
Advertisement
Table of Contents
