Chapter 1 Setting Up Your Disklavier Grantouch; Items Supplied With The Disklavier Grantouch; Connecting The Control Unit - Yamaha DGT7A Basic Operation Manual

Chapter 1
Setting Up Your Disklavier
GranTouch
This chapter provides information on the supplied items and how to set up your Disklavier GranTouch.
Items Supplied with the
Disklavier GranTouch
Check that the following items are supplied with
your Disklavier GranTouch:
• 1 Remote Control
• 2 Batteries for the Remote Control
• 2 Disklavier Sample PianoSoft Disks
• 1 Blank 3.5" 2HD Floppy Disk
• 1 Sample PianoSoft . PlusAudio
• Basic Operation Manual & Advanced
Operation Manual
• 1 Control Unit Suspension Bracket
• Assembly Guide (DGT2A only)
Connecting the Control
Unit
Make sure that the Control Unit is mounted on the
underside of the treble-side keybed and that the
control cable extending from the piano is firmly
connected to the TO CONTROL CABLE FOR
PIANO connector on the rear panel of the Control
Unit.
Also make sure that the CD control cable
TM CD Software
extending from the piano is connected to the CD
CONTROL connector on the rear panel of the
Control Unit.
☛ <DGT2A> See also the Asssembly Guide.
<DGT7A> Refer to step (4) in "Mounting the
Control Unit to the Disklavier GranTouch" at the
front of this manual.
CD control cable
Control cable
1