NEC MultiSync 3D JC-1404HME Service Manual page 13

I
CN-V, DY
CN-K
~-
CN-L
I
CN-H, DY
I
B
MAIN PWB
MAIN PWB
ASSY
~
CD
Pawl
-12 -
CN-S CN-M
~ ~
SUB PWB
lcN-v
l e ~
v.CN-CE
CRT PWB
9. Disconnect the connector "CN-8" and
"CN-CE" (from CRT PWB ASSY).
Disconnect the connector "CN-X" (from
MAIN PWB ASSY).
Remove the Anode Cap from CRT.
Disconnect the CRT PWB ASSY.
NOTE: When the anode cap is removed,
shorting the CRT's anode to ground
before touch it.
10. Disconnect the Connectors "CN-H, DY",
"CN-V, DY", "CN-C", "CN-M" and "CN-L"
(from MAIN PWB ASSY).
Disengage pawls at two places, then slide and
lift up the MAIN PWB ASSY.
.
.
..